Compact, AFFORDABLE Ventilator Tester!

1/3 the Size!
 

Order OnLine!
 
The Certifier-FA Test System from TSI - a company with over 30 years in flow measurement - is the truly convenient and affordable way to measure flows and pressures!
  • Only 1/3 the Price of 
    Competitive Instruments
  • Easy to Use
  • Battery Powered for Portability
  • A Complete Measurement Solution!

A Few of Certifier-FA's Capabilities:

  • Flow
  • Volume
  • Minute Volume
  • Inspiratory Time
  • I:E Ratio
  • Bias Flow Compensation
  • Respiratory Rate
  • Pressure
  • Peak & PEEP Pressure
  • Oxygen Concentration (Optional)

Certifier-FA Test Systems
 start at only
$2,475 with one flow sensor! 

Various options and configurations available! See Ordering Information below!

 

BC Group is proud to have been selected by TSI to bring this exciting new product to the biomedical community!

Q: Does Certifier-FA compensate for bias flow?
A: Yes. It continuously measures the baseline flow between breaths so it recognizes whether or not there is a bias flow present. If a bias flow is not present, it sets the threshold or trigger level at 20% of the peak flow delivered during the breath. If a bias flow is present, it sets the threshold or trigger level to 20% of the difference between the peak flow and the bias flow. During validation testing, the unit was tested in a variety of conditions, including with and without bias flow applied.

Q: What is the pressure range of Certifier-FA?
A: From -25 to +150 cmH2O, which is adequate for many/most respiratory applications. If you desire to measure pressure at higher pressures, we recommend our own BC Biomedical DPM-2000 Series or a Meriam Smart Manometer, also available from us. Either will economically add higher pressure capability to your Certifier-FA. And, even with this additional investment, your total cost is still significantly less than competing ventilator testers. 

Certifier-FA Datasheet PDF
Ventilator Tester Comparison Chart PDF

Ordering Information
Part # Description
4070 Controller, High Flow Module,
soft case & accessory kit
4075 Controller, Low Flow Module,
soft case & accessory kit
4078 Controller only
4076 High flow module only
4072 Low flow module only
4073 Oxygen kit only
4079 Accessory kit only
PSR-11-917J Replacement O2 Cell
BC20-40700 Protective Boot & Stand
1319288 Optional hard case
 

Accessory kit includes: 4 AA batteries, filter, pressure tubing, tubing adapters, flow module mounting bracket, screwdriver, manual, and soft carrying case.

A complete, fully-loaded Certifier-FA Test System consists of the following items:

4070 Kit

 $2,475
4072 Low flow module $695
4073 Oxygen kit $295

Total:

 Only $3,465 !
Add a SmartManometer
if you need to extend the
pressure range beyond 150 cmH2O		 $662

Compare this to competitive products costing $7,500 to $8,000!